Description
The VR-601 Flow Forged Wheel in Mystic Black is the perfect pairing to your show stopping Ford Raptor (Gen 1 and Gen 2) or F-150. Also available in Tungsten Graphite and Highland Bronze.
Vehicle Applications
Jeep Wrangler JK 2007+
Jeep Wrangler JL 2018+
Toyota Tundra 2007+
Dodge Ram 1500 2002-2018
Wheel Specs
Size: 20X9.0
PCD: 5X127 (Jeep)
PCD: 5X150 (Toyota)
Offset: -6 (Jeep)
Offset: 18 (Toyota)
Offset: -12 (Dodge)
Backspacing: 5.5″
Bore: 87
Load Rating: 2,600 lbs
WARRANTY
With proper care, professional installation, and an assumption of reasonable use on public roads & highways, Vorsteiner Flow Forged Wheels carry a Lifetime Warranty against manufacturer and structural defect. In addition, Vorsteiner offers a full 2-Year cosmetic warranty on the factory painted finish.
All warranty claims will be limited to product repair or replacement at Vorsteiner’s discretion, and does not include reimbursement for any costs associate with labor, shipping, transportation, or loss of use. Claims will only be accepted with a dated proof of purchase and must be processed through the original dealer or distributor where the wheels were purchased and installed. Warranty is only valid to the original purchaser and must have been installed by an Authorized Vorsteiner Dealer.
INSTALLATION INSTRUCTIONS
Test fit each wheel (front and rear) before mounting and balancing any tires in order to ensure proper fitment to the vehicle as well as for adequate clearance between any brake and/or suspension components. Returns or exchanges will not be approved based on fitment after tires have been mounted to the wheels.
Observe the tire manufacturer’s suggested tire size based on rim width. Clearance between fenders, fender linings, and suspension components should be checked before mounting opposite side tire. Before the vehicle is released to the customer, the vehicle should be checked for tire interference while on the rack, as well as on the road by driving at slow speeds (up to 10 mph) and turning in both directions at full steering lock.
All Venomrex wheels are engineered applications specific for use with factory hardware. The use of hub centric rings, spacers, or adaptors to alter the fitment of the wheel is not authorized by Venomrex. When fitted to vehicles not properly validated or approved by our engineers, the installer will be fully responsible for the performance and final outcome.
Tires should not be inflated in excess of 50 psi in order to seat the tire bead. Please follow the tire manufacturer’s recommended driving pressures before releasing the vehicle to the customer.
Wheel bolts/lugs should be tightened by hand, in a progressive crisscross pattern, and without the use of air powered or electric impact wrenches. Always follow the vehicle manufacturer’s recommended torque specifications. All wheels should be fully torqued after the full weight of the vehicle is lowered onto the suspension.
Please ensure that the vehicle is returned to the installer within 50 – 100 miles of use for a visual inspection, and recheck for proper tire inflation and torque specifications.
